Remove the broken screw
Piezo ignition, and adjustable flame up to 1300 ° C
This tool is designed for optical works on frames, temples (driving out, penning, setting markting, etc...)
This machine allows: - to identify the brand of the lens manufacturer, - to know the additional power of a progressive lens, - to check and to find progressive lenses.Machine tiltable according to need.
To manually remove the broken screw on frames Delivered with 3 anvils (1,0 - 1,3 et 1,5mm)
Combination tester available for testing lens : - UV400 - Anti-radiation - Photochromic
Torch on disposable gas cartridge.
This machine is used to demonstrate photochromatic lenses to the client. It combine the instant UV test and photochromic detector. With the use of this device the lenses reach their drakest absoption in 15 sec.The device is equipped with a reference scale to compare lenses.
The tensiscope tensiscope makes the identification of strains on mounted lenses possible. Such strains can cause distortions and, in glass lenses, chips. There are always strains when mounting a lens. Any excessive strain shown by the tensiscope must be eliminated. This tensiscope is the only one with an adjustable inclination, according to the...
The tensiscope tensiscope makes the identification of strains on mounted lenses possible. Such strains can cause distortions and, in glass lenses, chips. There are always strains when mounting a lens. Any excessive strain shown by the tensiscope must be eliminated.
Glass beads ø2mm for glass beads frame heater
The Microtorch has a gas control gauge with a main control which stays adjusted between uses.
For hardening UV glues like 476100 Timer: 180 seconds Power : 4 x 9W
Equipped with a slot adapted to mini pedestral drill. Vertical and horizontal slots in the jaw to keep the material round. Jaw: 50 x 10mm Maximum clamping width: 34mm
Allows to carry out all measures of useful diameters with only one figurative drawing.
The device lends itself to the mounting of most flex temples. Il allows the use of standard slotted or cross screws with a 1.8 to 2.0 or 2.5 mm head diameter. This device is delivered with two screw guiding types and two screwdrivers with long blades (one with a flat blade and the other one with a cross blade). The kit includes: - 1 device, - 1...
Thermometer for tinting machine. - 20°C to + 150°C