Tank with a 0.8l capacity stainless steel resistant to wear.
Tank with a 2l capacity stainless steel resistant to wear.
Compact vertical frame heater with air concentrator.
Remove the broken screw
To manually remove the broken screw on frames Delivered with 3 anvils (1,0 - 1,3 et 1,5mm)
Plastic lens holder for tinting machine
This frontofocometer is used to measure spherical, cylindrical and prismatic frontal power.
Piezo ignition, and adjustable flame up to 1300 ° C
The machine is mounted with a 0,55mm thick diamond disc.
Measuring the pupillary distance. Digital display of deviations 0,1 - 0,2 or 0.5 mm: - Monocular: from 23.0 to 41.5 mm - Binocular: from 46.0 to 83.0 mm
This tool is designed for optical works on frames, temples (driving out, penning, setting markting, etc...)
Frontal hand edger with finishing diamond conical wheel. Possibility of reversing the direction of rotation 3000rpm Power : 120 Watts
Powerfull frame warmer with large platform allowing to work easily and without risk. Supplied with a heat concentrator
The hand edger allows to shape mineral, organic and polycarbonate lenses.It is fitted with a diamond wheel with a 100 mm diameter and a 32 mm width.Water feeding drop by drop. The water is collected in a tank or evacuated by a tubing. Rough / Finishing diamond wheel
This machine allows: - to identify the brand of the lens manufacturer, - to know the additional power of a progressive lens, - to check and to find progressive lenses.Machine tiltable according to need.
Used to measure pupillary distance.
Vertex power range : 0 ± 15D Accepted lens diameter : 20 mm - 80 mm Cylinder axis : 0 - 180° (Step : 5°) Prism axis : 4 prism diopter (Step : 1 prism diopter) Eyepiece focusing : -5D à +5D
The groove depth is adjustable in increments from 0 to 0,7mm on lenses from 22 to 72mm in diameter and from 1,5 to 11mm in edge thickness. The machine is mounted with a 0,55mm thick diamond disc. The groove position is fully adjustable. The groove cutting can be made automatically or manually. Moto 75 watts
Hand edger fitted with a Sensor which starts the machine when the operator's hand approaches the working aera. The edger stops aotomatically. Fitted rough / finishing diamond wheel ø100 x 35mm. Power : 150 Watts
Combination tester available for testing lens : - UV400 - Anti-radiation - Photochromic